



|
M8 SERIES | IEC 61076-2-104 | IP67
M8 Circular Connector
Cable Assemblies
2 / 3 / 4 / 5 / 6 / 8 poles · A / B coding · Straight / Right-angle · Overmolded · OEM / ODM
The Longzhiyi M8 series uses an 8 mm metric threaded coupling and is designed for compact sensors, actuators and space-limited I/O. With four in-house divisions — wire & cable, wire harness, copper materials and polymer compounds — we control the full process from compound modification and copper drawing to cable extrusion, connector overmolding and 100% final inspection. Pole count, coding, gender, outlet orientation, cable length, jacket material, printing and packaging can all be built to your drawings, specifications or physical samples.
|
|
21 Years
Focused on industrial cable & wiring
|
IP67
When mated (standard models)
|
>500
Mating cycles (standard models)
|
OEM / ODM
Drawing · Sample · Spec based
|
|
01
|
Product Overview
Why M8
|
|
Compact Footprint
An M8 threaded interface of only 8 mm suits miniature photoelectric and inductive proximity sensors and equipment with tight installation space.
|
Secure Under Vibration
Threaded coupling with anti-vibration locking and an FKM seal keeps the connection tight and sealed on motors, production lines and other vibrating equipment.
|
Plug-and-Play
Factory overmolding and 100% continuity testing eliminate on-site soldering, shorten commissioning and simplify later maintenance and replacement.
|
|
02
|
Key Advantages
Six Reasons to Choose Us
|
|
One-Piece Overmolded Sealing
The connector is fitted with a seal and the cable-to-connector transition is overmolded for a seamless barrier; water-blocking fillers can be added per project. Standard models reach IP67 (1 m / 30 min); higher ratings are evaluated per project.
|
Threaded Anti-Vibration Locking
An M8 screw coupling delivers better sealing and vibration resistance than bayonet styles — ideal for permanently installed equipment in vibrating environments.
|
|
Gold-Plated Contacts
Solid gold-plated brass contacts; standard models achieve contact resistance ≤ 5 mΩ and insulation resistance ≥ 100 MΩ. A 360° shielded version is available for EMI-heavy environments with VFDs and servo drives.
|
Full In-House Supply Chain
Four divisions — cable, harness, copper and polymer materials — cover compound modification, copper drawing, cable extrusion, overmolding and final testing, keeping raw material to finished goods under our own control.
|
|
100% Final Inspection
Incoming inspection, in-process checks, 100% final inspection and reliability sampling, with a three-level self / cross / dedicated inspection system. Continuity, dielectric, insulation, terminal pull-out, sealing and mating force are tested and batch numbers retained.
|
Built to Your Drawing
OEM and ODM supported: poles, coding, gender, straight / angled, length, jacket, shielding, colours, printing and packaging are configurable. NDAs are welcome and sample-based reverse engineering is available.
|
|
03
|
Technical Specifications
Parameters
|
| Item | Specification |
|---|---|
| Series | M8 circular connector (aviation plug / sensor connector) cable assemblies |
| Standard | IEC 61076-2-104 (M8 metric threaded circular connectors) |
| Coupling thread | M8×1 screw locking with anti-vibration design |
| Pole count | 2 / 3 / 4 / 5 / 6 / 8 poles (A-coded: 2, 3, 4, 6, 8; B-coded: 5) |
| Coding / keying | A-CODE (general sensors and actuators), B-CODE (fieldbus and interfaces requiring mismatch protection); select to match the device port |
| Gender | Male (pins) / Female (sockets) |
| Outlet | Straight / Right-angle (90°) |
| Construction | Factory overmolded, field-wireable (assembly type), panel-mount receptacle (solder cup / PCB pins, front or rear lock) |
| Shielding | Unshielded / Shielded (360° full shielding bonded to the metal connector shell) |
| Protection | IP67 when mated (standard models); IP68 and higher ratings evaluated per project |
| Mating cycles | > 500 (standard models; per model test report) |
| Operating temperature | Dynamic -25℃ ~ +80℃; static -40℃ ~ +80℃ (confirm by model and jacket material) |
| Standard lengths | 0.3 m / 1 m / 2 m / 5 m / 10 m; other lengths on request |
| Cable options | PVC / PUR jacket; TPU, LSZH and other compounds available; Class 5 / Class 6 conductors per application |
| Item | 2 / 3 / 4 / 6 poles (A) | 8 poles (A) | 5 poles (B) |
|---|---|---|---|
| Rated current | 3 A | 1.5 A | 3 A |
| Rated voltage | 50 V AC / 60 V DC | 30 V | 50 V AC / 60 V DC |
| Conductor size | 0.25 mm² (24 AWG) | 0.14 mm² (26 AWG) | 0.25 mm² (24 AWG) |
| Contact resistance | ≤ 5 mΩ | ≤ 5 mΩ | ≤ 5 mΩ |
| Insulation resistance | ≥ 100 MΩ | ≥ 100 MΩ | ≥ 100 MΩ |
| Shielded | Optional | Optional | Optional |
| Protection | IP67 (mated) | IP67 (mated) | IP67 (mated) |
| Part | Material |
|---|---|
| Insert / insulator | PA / TPU |
| Overmold | TPU (one-piece injection molding) |
| Contacts | Gold-plated solid brass (phosphor bronze on request) |
| Screw / coupling nut | Nickel-plated brass; aluminium, nylon or quick-plug type available |
| Seal / O-ring | FKM fluororubber; other compounds by operating condition |
| Cable jacket | PUR; TPU, LSZH, oil-resistant and weather-resistant compounds available |
| Core insulation | PP / HDPE |
| Conductor | High-purity oxygen-free copper, Class 5 / Class 6 by application |
| Flame rating | Up to UL94 V-0 by model; refer to the model-specific test report |
| The following are reference parameters for standard M8 models, provided by model and operating condition. Final values are defined by the model-specific datasheet, drawing and test report. |
|
04
|
Selection Matrix & Pin Assignment
Coding & Wire Colours
|
| Coding | Poles | Typical use | Rated current | Rated voltage | Conductor |
|---|---|---|---|---|---|
| A-CODE | 2 / 3 / 4 | Proximity and photoelectric switches, compact sensors, actuators, 24 V signals | 3 A | 50 V AC / 60 V DC | 0.25 mm² / 24 AWG |
| A-CODE | 6 | Multi-channel signal acquisition, compact I/O | 3 A | 50 V AC / 60 V DC | 0.25 mm² / 24 AWG |
| A-CODE | 8 | Multi-channel signal / low-power transmission | 1.5 A | 30 V | 0.14 mm² / 26 AWG |
| B-CODE | 5 | Fieldbus, IO-Link and interfaces requiring mismatch protection | 3 A | 50 V AC / 60 V DC | 0.25 mm² / 24 AWG |
|
Pin layout (mating face view)
|
|||||||
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
| Poles | Pin & wire colour |
|---|---|
| 3 | 1 BN brown (+V) · 3 BU blue (0 V) · 4 BK black (signal) |
| 4 | 1 BN brown · 2 WH white · 3 BU blue · 4 BK black |
| 5 | 1 BN brown · 2 WH white · 3 BU blue · 4 BK black · 5 GY grey |
| 6 | 1 BN brown · 2 WH white · 3 BU blue · 4 BK black · 5 GY grey · 6 PK pink |
| 8 | 1 WH white · 2 BN brown · 3 GN green · 4 YE yellow · 5 GY grey · 6 PK pink · 7 BU blue · 8 RD red |
|
05
|
Ordering Code
Part Number Builder
|
|
LZY - M8 - PUR - 4 - M - S - C - A - (T) - _2M
Example: LZY-M8PVC4MSCA_2M = M8 / PVC jacket / 4 poles / male / straight / brass nut / A-coded / unshielded / 2 m
|
| Pos. | Code | Meaning and options |
|---|---|---|
| 1 | LZY | Brand: Longzhiyi Cable |
| 2 | M8 | Series: M8 (also M12 / M16 / M23 / GX in the same family) |
| 3 | PUR | Cable jacket: PUR (other compounds evaluated per project) |
| 4 | 4 | Poles: 2 / 3 / 4 / 5 / 6 / 8 pins or sockets |
| 5 | M | Gender: M = male / pins; W = female / sockets |
| 6 | S | Head type: S = straight; A = right-angle |
| 7 | C | Nut material: C = brass; A = aluminium; N = nylon; I = quick-plug |
| 8 | A | Keying: A = A-CODE; B = B-CODE |
| 9 | (T) | Signal: T = shielded; blank = unshielded |
| 10 | _2M | Length: 03 = 0.3 m, 1 = 1 m, 2 = 2 m, 10 = 10 m … custom lengths available |
| Panel-mount version: LZY - M8 - A - B - F - 3 - M - S - C - T - _M (Coding - Process B=solder - Lock F=front / R=rear - Poles - Gender - Head - Nut - Shielding - Length) |
| Part numbers are for selection reference only. Final part numbers, pin assignment, dimensions and length follow the drawing, technical agreement and quotation confirmed by both parties. Please consult our sales or engineering team for details. |
|
06
|
Options & Customization
Build to Your Requirement
|
| Item | Available options |
|---|---|
| Construction | Factory overmolded / field-wireable assembly type / panel-mount receptacle (solder cup, PCB pins, front or rear lock) |
| Head & gender | Straight / 90° right-angle; male (pins) / female (sockets) |
| Poles & coding | 2 / 3 / 4 / 5 / 6 / 8 poles; A-CODE / B-CODE |
| Shielding | Unshielded / shielded (360° full shielding with low-impedance bond to the metal shell) |
| Coupling nut | Nickel-plated brass / aluminium / nylon / quick-plug type |
| Cable & jacket | PUR / TPU / LSZH; oil-resistant, UV-resistant, weather-resistant and wide-temperature compounds by application |
| Colours & printing | Custom core and jacket colours, printing, labels and shipping marks; neutral or customer-brand packaging |
| Length & branches | From 0.3 m, custom lengths; double-ended cords, Y-type / multi-branch harnesses and mixed connector combinations |
| Engineering support | cable construction drawings, wiring diagrams, dimensional drawings and pin-assignment drawings; sample-based reverse engineering |
|
07
|
Applications
Where It Is Used
|
| Industry | Typical use |
|---|---|
| Industrial & collaborative robots | End-of-arm miniature sensors, limit switches, robot-body signal breakout |
| Automation lines & sensors | Proximity and photoelectric switches, safety light curtains, distributed I/O signal connections |
| CNC machines & machining centres | Tool changers, position switches and oil-resistant signal harnesses around coolant |
| Servo drives & machine vision | Encoder feedback, camera trigger and signal transmission; shielded versions for high-EMI areas |
| NEV & battery production | Production-line sensors and actuators, test fixture signal wiring |
| PV & energy storage | Signal acquisition at module and equipment level, compact connections in outdoor cabinets |
| Warehousing, AGV & packaging | Mobile-vehicle sensors, sorting-line photoelectric switches, position detection |
| Medical / aesthetic devices & smart home | Miniaturised internal harnesses and precision probe wiring |
| These are typical applications in our core markets. We provide selection advice per project condition; the final solution depends on the device interface, load current, routing space and environment. |
|
08
|
Quality Control
Inspection & Traceability
|
| Incoming | In-process | Molding / Crimping | 100% Final | Reliability | Traceability |
| Test stage | Main items |
|---|---|
| Electrical | Per-core continuity, dielectric and insulation resistance, contact resistance, wire-sequence verification |
| Mechanical | Terminal pull-out force and crimp cross-section, mating force and mating life, nut locking torque, visual and dimensional checks |
| Environmental | Water ingress / air-tightness, drenching, salt spray, high / low temperature, oil and weathering validation (by model and project) |
| Materials & compliance | RoHS halogen screening, micro-hardness, image measurement, material reports |
| Equipment | Salt spray tester, drenching test chamber, air-tightness detector, integrated plug tester, insertion / withdrawal force tester, image measuring instrument, RoHS halogen detector, micro Vickers hardness tester |
| Documentation | A factory inspection report is issued per batch and the production batch number retained, traceable to raw-material lot, team and test records. Our in-house laboratory supports R&D and outgoing inspection; third-party reports are issued by qualified partner laboratories |
|
09
|
About Longzhiyi Cable
Source Manufacturer
|
| Item | Detail |
|---|---|
| Experience | Founded in August 2005 — 21 years focused on industrial cables and integrated control-equipment wiring |
| Facilities | R&D centre and HQ in Qishi, Dongguan plus a production base in Deqing, Zhaoqing; a 30-mu site with over 30,000 m² of floor space |
| Organisation | Four divisions: wire & cable, wire harness, copper materials and polymer materials. Over 100 employees and an R&D team working across materials, cable construction and electronic harnesses |
| IP | 60+ patents across affiliated entities, subject to the certificate list |
| System & recognitions | ISO 9001:2015 quality management system; National High-Tech Enterprise, Guangdong Innovative SME and SRDI SME |
| Portfolio | Sensor connection cables, industrial cable harnesses and new-energy cable harnesses, including high-flex drag-chain cables, robot torsion-resistant cables, servo and encoder cables, and M8 / M12 / M16 / M23 / GX circular connector harnesses |
| Service | Pre-sale selection, in-process progress updates and after-sales technical support; on-site factory audits, one-to-one video factory tours, third-party audits and customer resident inspection are welcome |
|
10
|
Cooperation Process
From Enquiry to Delivery
|
| 01 Enquiry | 02 Evaluation | 03 Drawing approval | 04 Sampling | 05 Production | 06 Delivery |
|
01 Enquiry
Share operating conditions, interface, voltage / current, poles, length and special requirements
|
02 Evaluation
Engineers assess materials, construction, shielding and protection
|
03 Drawing approval
Cable construction, wiring and pin-assignment drawings issued for confirmation
|
|
04 Sampling
Samples with test records; lead time confirmed after project evaluation
|
05 Production
Four divisions in coordination, with full-process QC and batch traceability
|
06 Delivery
Agreed packaging, technical support and long-term supply arrangements
|
| Sample lead time is confirmed after project evaluation; MOQ, lead time, pricing and rush arrangements follow the formal quotation or contract. |
|
11
|
Packaging & Delivery
Export Ready
|
| Item | Description |
|---|---|
| Standard packing | Harnesses bundled and carton-packed; optional individual anti-static bags, EPE cushioning and reinforced outer cartons. Protective caps on terminals and connectors prevent deformation and oxidation in transit |
| Marking | Model, specification, quantity, production batch number and shipping marks for easy counting and traceability |
| Export & custom packing | Export packing, neutral packing (without our identification) and customer-brand packaging; palletised options for forklift handling |
| Delivery terms | Products are supplied to Europe, Asia, the Americas and other regions. FOB / CIF / DDP available, with documentation required for target markets |
| Commercial terms | Safety stock for standard items, made-to-order for non-standard items; small trial orders and phased deliveries supported. MOQ, lead time, pricing, warranty and rush arrangements follow the formal quotation or contract |
|
12
|
FAQ
Frequently Asked Questions
|
|
QHow do I choose between M8 and M12? Is bigger always better?
No. M8 is compact and suits small sensors (photoelectric and inductive proximity switches) where space is tight and current demand is modest. M12 covers a wider range of signals and low-power supply, and is the mainstream choice for PLC I/O modules and servo drives. Match the actual load current, signal type and installation space rather than simply sizing up.
|
|
QWhat is the difference between IP67 and IP68?
IP67 means fully dust-tight and protected against temporary immersion (1 m / 30 min). IP68 covers longer or deeper immersion. For ordinary industrial sites with occasional water or washdown, IP67 is normally sufficient; evaluate IP68 for permanently damp, submerged or high-pressure washdown areas. Actual protection also depends on seal material, installation practice and correct tightening.
|
|
QWhat do A / B coding mean?
Coding is a mechanical key that prevents mismating. A-coding is the general type for sensors, actuators and standard signals. B-coding is used for fieldbus such as Profibus / CANopen and interfaces that must be kept separate. D / X coding serves Industrial Ethernet. A wrong key may not mate at all or may not meet the required data rate — confirm the device protocol and speed before selection.
|
|
QHow do pin (male) and socket (female) types correspond?
Male contacts are pins; female contacts are sockets. Typically the device side uses a female socket and the cable side a male plug, though either can be built to the device interface. Send us the device port model or a clear photo and we will match it for you.
|
|
QWhat are the mating life and contact resistance?
Standard M8 models exceed 500 mating cycles, with contact resistance ≤ 5 mΩ and insulation resistance ≥ 100 MΩ (per model test report). Allow a margin for the actual mating frequency to avoid wear-related contact issues.
|
|
QDo you support OEM / ODM, and what information is needed?
Yes. Please provide poles / conductor size, coding, gender and head type, cable length and outlet direction, jacket material and colour, shielding and protection rating, connector models at both ends, and pin assignment / wire sequence. If no drawing is available, 1–2 physical samples are enough for us to measure and reproduce. Material formulation, cable construction and harness assemblies can all be designed to order, and NDAs are welcome.
|
|
QHow are samples, MOQ and lead time handled?
Standard items are held in safety stock; non-standard items are made to order. Small trial orders and phased deliveries are supported. Sample lead time is confirmed after project evaluation; MOQ, lead time, pricing and rush arrangements follow the formal quotation or contract.
|
|
QWhich approvals do you hold, and can you provide test reports?
We are certified to ISO 9001:2015. Selected models are certified to CCC, UL, CE and CB, and RoHS / REACH test reports and factory inspection reports can be provided per model; the applicable certificate governs. Our in-house laboratory supports R&D and outgoing inspection, while third-party reports are issued by qualified partner laboratories.
|
|
QCan we audit the factory?
Yes. On-site audits, one-to-one video factory tours, third-party audits and resident customer inspection are welcome. Visits can cover copper drawing, extrusion, harness assembly, the testing laboratory and warehousing.
|
|
13
|
Contact Us
Get in Touch
|
|
Sales & Technical Support
Send us your device interface, pole count, cable length and operating conditions — our engineering team will return a selection proposal and quotation.
|
|
| Contact | Ms. Zeng Lanzhen, Sales General Manager |
| Tel / WhatsApp | +86 13926860468 |
| zenglanzhen6688@gmail.com | |
| Website | www.longzhiyidx.com |
| Address | Room 101, Building 1, No.46 Qiheng Road, Qishi Town, Dongguan City, Guangdong Province, China |
| Export entity | Dongguan Longyi Tuohai Cable Co., Ltd. (cross-border sales entity; Longzhiyi Cable is the brand) |
|
Technical parameters are provided by model and operating condition for reference only; the model-specific datasheet, drawing and test report govern. Product approvals are provided per model and governed by the corresponding certificate. MOQ, lead time, pricing, warranty and after-sales terms follow the formal quotation or contract.
© 2005-2026 Longzhiyi Cable | One-stop Industrial Cable & Control Wiring Solutions
|
Online consultation
Related Recommendations
We use essential cookies to run this website and, only with your permission, optional cookies for preferences, analytics and marketing. You can accept all, reject optional cookies, or choose category by category — and change your choice at any time. Read our Privacy Policy.
Choose which categories to allow. Essential cookies cannot be switched off.


